Şayet iki servis sağlayıcı kullanıyorsanız, pcc metodu ile Mikrotik cihazlarınızda yük dengeleme yaparak yerel ağınızdaki istemcilere daha verimli bir bant genişliği sağlayabilirsiniz. Yukarıda bulunan örnek topoloji üzerinden gidersek: /ip addressadd address=192.168.88.1/24 network=192.168.88.0 broadcast=192.168.88.255 interface=Localadd address=192.168.10.2/24 network=192.168.10.0 broadcast=192.168.10.255 interface=WAN1add address=192.168.20.2/24 network=192.168.20.0 broadcast=192.168.20.255 interface=WAN2 Cihazı dns sunucusu olarak kullanalım: /ip dns set allow-remote-requests=yes cache-max-ttl=1w cache-size=5000KiB max-udp-packet-size=512 servers=8.8.4.4,8.8.8.8 Paketleri işaretlemek ve yönlendirmek için mangle kurallarına ihtiyacımız var. /ip firewall mangleadd chain=input in-interface=WAN1 action=mark-connection new-connection-mark=WAN1_connadd chain=input in-interface=WAN2 action=mark-connection new-connection-mark=WAN2_connadd chain=output connection-mark=WAN1_conn action=mark-routing new-routing-mark=to_WAN1add chain=output connection-mark=WAN2_conn action=mark-routing new-routing-mark=to_WAN2add chain=prerouting dst-address=192.168.10.0/24 action=accept in-interface=Localadd chain=prerouting dst-address=192.168.20.0/24 action=accept in-interface=Localadd chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier=both-addresses-and-ports:2/0 action=mark-connection new-connection-mark=WAN1_conn passthrough=yesadd chain=prerouting dst-address-type=!local in-interface=Local per-connection-classifier=both-addresses-and-ports:2/1 action=mark-connection new-connection-mark=WAN2_conn passthrough=yesadd chain=prerouting connection-mark=WAN1_conn in-interface=Local action=mark-routing new-routing-mark=to_WAN1add chain=prerouting connection-mark=WAN2_conn in-interface=Local action=mark-routing new-routing-mark=to_WAN2 Son olarak routing mark ile birlikte yeni route tanımlarını işledikten sonra ağımızı maskeleyelim. /ip routeadd dst-address=0.0.0.0/0 gateway=192.168.10.1 routing-mark=to_WAN1 check-gateway=pingadd dst-address=0.0.0.0/0 gateway=192.168.20.1 routing-mark=to_WAN2 check-gateway=pingadd dst-address=0.0.0.0/0 gateway=192.168.10.1 distance=1 check-gateway=pingadd dst-address=0.0.0.0/0 gateway=192.168.20.1 distance=2 check-gateway=ping/ip firewall natadd chain=srcnat out-interface=WAN1 action=masqueradeadd chain=srcnat out-interface=WAN2 action=masquerade Hepsi bu kadar. Örnekte iki internet devresi var. Ama ikiden fazla kullanılıp kuralları buna göre revize edebilirsiniz.